Common Causes of Burnout in Hot Water Heater – You may be tempted to ignore a damaged water heater when getting ready to take a shower, but it can be frustrating. A Heating Element Burnout is usually to blame when your faucets are leaking cold water. An electric heater could malfunction and require the replacement of the Water Heating Element frequently. You should know what might be causing your Water Heater Element to keep going bad if it continues to do so. So, let’s get started without wasting any more time. But before we begin, you should know what a water heater is and how it works.
What’s A Water Heater?
A Water Heater is a device that’s mainly used to supply heated water to the entire house. It is also important to note that they are used to ensure a continuous supply of hot water. Without a Water Heater, you will not have easy access to the hot water like you do right now! So, it is an essential piece of technology that is present in almost every modern house. Additionally, it also comes in all sorts of shapes and sizes, and it can be electrical, solar, gas, etc.
How Does A Water Heater Heats The Water?
If you have an electrical Hot Water System in your house then, its working is straightforward. Normally, it consists of a water tank with an inlet and outlet for the water to enter and exit. And, inside the water tank is where the magic to heat up the water happens. Inside the tank, there’s usually a Heating Element or more depending on the size of the water tank. The Heating Element is supplied with electricity which heats up the element thus, leading to the heating of water. And, that’s how parkville new water heater work in a nutshell.
Top Reasons Behind The Hot Water Element Burning Out
A Heating Element is by itself a simple piece of equipment. And one which can be easily damaged. So, here are some of the most common causes of Heating Element Burnout that are explained by our Plumber Sydney team. Starting our list with:-
-
Faulty Wiring And Connection
A Heating Element in an electrical Hot Water System is supplied electricity through the electrical wires. And, these wires are nothing unique; they are primarily general-purpose wires. So, it also poses the risk of wire damage or wrong connection. If there’s an excess in electricity, it will be lead wire supplying extra current leading to Heating Element Burnout. In addition, if the wiring connection is loose, it could lead to the same problems, especially if there’s something wrong with the ground wire connected to the tank.
-
A Sudden Power Surge
A surge of electricity can also damage the Heating Element of an Electric Sydney Hot Water Heater since they are connected to outlets in your home. There are times when there is a surge of energy during electrical storms or when the power company raises it intentionally. The Heating Element of an Electric Water Heater can be destroyed if the voltage exceeds its rating.
By obtaining surge protection installation by an electrician at your home, you can prevent such a problem. Certain types of plugs can also control power surges from causing damage to items plugged into them. When your heating unit fails after an unexpected but sudden surge of power, you may want to consider one of these options.
-
Air Pockets In The Water Tank
A Heating Element is designed to work in a completely sealed environment, surrounded by water. If you were to use them without water, you can expect burnout or get damaged quickly. That’s why, if there are any air pockets in the water tank, it can lead to Heating Element Burnouts. Under such cases, we recommend looking for Hot Water System Service to get the air pockets removed.
A Professional Plumber can look inside the water tank to search for the cause of the air pocket. And, once the reason is located, they can also quickly eliminate the cause. So, call in a hot water System Service expert immediately to inspect the water tank for air pockets.
-
Minerals In The Water
Heating Element and Hot Water Systems have a limited lifespan, just like every other part of your house. The longevity of your system could also be diminished if your water supply is contaminated with minerals. Therefore, its ultimate demise will be sooner than expected. The following is an explanation of how it damages the Heating Elements. All the minerals from the water often create a thick layer all around the Heating Element. Consequently, the element is overheated since it is no longer in contact with the water usually surrounding it.
How Much Does It Cost To Replace A Heating Element?
The cost of replacing a heating element is dependent on several factors including the type of element, length, and thickness. Most common types of heating elements are available in standard sizes or can be custom sized for you. Custom-sized heating elements are usually more expensive than common sizes due to additional cutting charges.
While you might think that it would be a simple matter to replace a defective element, there are actually a number of variables that can impact the price. The primary issue is that many elements consist of multiple parts that need to be replaced individually. The majority of heating elements range from $200-$400.
Moreover, the average cost to replace a heating element in a water heater is about $300. If you have to call a plumber or HVAC technician, the total will likely be more than $300. The cost of replacing the heating element varies by location and other factors, so conduct a quick search for local repair services before calling a plumber. You can discuss more on prices and service charges with our experts.
How To Avoid All Of These Problems, All At Once?
Well, you can never indeed avoid Heating Element Burnout due to the limited lifespan of the element. But, you can still delay it by following some simple tactics. Like, ensuring your Hot Water System is always connected to a surge protector. And making sure the water supply is not contaminated by minerals.
Furthermore, you can also opt for frequent Hot Water System Service to regularly inspect the Hot Water System. Additionally, you might also want to have the rest of your Plumbing System checked adequately by an expert. It will ensure you have nothing to worry about, and all of the systems in your house are working in tip-top condition.
In Short: When it comes to preventing hot water heater burnout, you can hope for the best but plan for the worst. If you want to avoid more costly repairs in the future, take preventative measures now by getting your unit serviced every year. Call us today to learn more on What Are the Common Causes of Burnout in Hot Water Heater Elements!
Where To Get Hot Water System Experts?
Once you call SOS Plumbers regarding Common Causes of Burnout in Hot Water Heater we listen to your problems and suggest the most suitable course of action. And, we will also dispatch a team of Hot Water System Experts to your location. They will inspect the entire system to look for the cause of Heating Element Burnout. And, once they find the reason, they let you know about it immediately, and you can decide what to do next. If it’s repairable, we will repair it. Otherwise, a Heating Element Replacement is always an option. Thanks for reading The Post City.