Thinking about changing the roof? Well, then you might get confused since there are numerous options available in the market. The best way to select industrial roofs is to look into the pros and cons of different roofing types. You don’t have to go and search for these advantages and disadvantages because we have done that work for you in this post.
You just need to go for some good local commercial roofing contractors. You can find these companies by visiting a business listings site like HighFive Listings, Yelp, Home Advisor, etc. They will help you in getting the exact service you are searching for in your area. Listed below are some types of roofs and their pros and cons. To help you in making the right decision about choosing the best industrial roofs.
Metal retrofit roofs
In metal retrofit roofing, a steel framework is laid over the existing roof. It is a high-performance and low-maintenance metal panel.
Pros of using metal retrofit roofs in industrial roofing
Cost-effectiveness is one of the biggest advantages of using this roof. It will cost a lot less than a standard metal roof. You can continue the daily work while its installation since the original metal roof will provide you the protection needed for your building.
It will also make the re-roofing a good option, which proves to be environmentally-conscious. So basically it’s an eco-friendly retrofitting option. Retrofitting the already existing roof will provide extra insulation and the advantages of reusing your current roof. Eventually helping in saving the energy costs and keeping the building’s temperature regulated.
Cons of using metal retrofit roofs in industrial roofing
Installing a metal retrofit roof over an existing metal roof can come at a significant increase in cost factor, as compared to simple retrofit. If you cannot afford it, you can go for metal roof replacement instead.
Flat roofs
They are commonly used for commercial buildings. You can find a very good quality flat roof from any commercial roofing company. But before doing that, here are a few advantages and disadvantages of using it. So you should know it first.
Pros of using flat roofs in industrial roofing
The most important factor in any roofing installation is its cost. For commercial use, a roof can even cost a little more, since the buildings are quite bigger than any normal house. If you are selecting flat roofs as your first choice then you shouldn’t have to worry about the cost factor.
Due to fewer square feet to be covered, these flat roofs require less material. This is the main reason that these types of industrial roofs are cost-effective. The installation also has an impact on the next commercial roof repair. But with flat roofs, it will be easy. This roof type is much easier and quicker to install as compared to any other type. The ease in the next installation will also give the building owners a relaxation for price.
There are a lot of options available for building owners to choose from. Like, PVC, bitumen, TPO, EPDM, rubber rolled industrial roofs, modified bitumen or you can also go for built-up roofing. Besides these different kinds of flat roofs, you can also select a wide range of available colors. But usually white color is preferred by most of the building owners.
It will also help you in reducing energy waste because of the cooling cost. Its reflective properties will be a plus point in this. You can move the air conditioners from the ground to the roof. Secondly, it is much easier to install satellite dishes and solar panels on flat roofs.
Now coming towards the last advantage that is its maintenance. Its maintenance and drain cleaning is easier regardless of the weather conditions.
Cons of using flat roofs in industrial roofing
Poor drainage is one of the major issues when you are using this flat roof. The standing water can degrade the roofing material quickly. If the material breakdowns, then it could cause water damage inside the building.
Low-sloped roofs
This type of industrial roof is used in industrial buildings, apartment buildings, factories, and warehouses. They have a slight pitch but at first sight, they might appear flat.
Pros of using low-sloped roofs in industrial roofing
Due to its pitch, it will allow water to run off the roof. It will direct the water in the appropriate direction like towards saddles, and drains. This happens because of its roof design. A few square feet will be required for roofing materials due to the low-pitched area.
It will be easier and safer to work on the low-sloped roof for roofer and installer workers. The repair and replacement of industrial roofs are easier to perform with low-sloped roofs. As a building owner, you will also be able to install a solar panel, satellite dishes, and air conditioners on the roof easily.
Cons of using low-sloped roofs in industrial roofing
If there is a chance of heavy snow in your area then this might not be an appropriate choice. As heavy snow will not melt easily, which in turn can add weight to the roof.
Pitched roofs
Pitched roofs are used in both residential and commercial buildings. There are a few pros and cons of using it too.
Pros of using pitched roofs in industrial roofing
Its increased slope provides great water and snow runoff. Because its steeper roof structure will make it easy for the debris and liquid to roll off the roof. This will reduce the chances of mold damages and leaks. Its steep structure will also help you in reducing the repair and making the maintenance easy.
Cons of using pitched roof in industrial roofing
It is significantly more difficult to perform the repair and maintenance work with the steeply inclined roof. Unless you hire some suitable commercial roofing companies in your area. They will have all the safety tools and gadgets in case of any incident.
These were the few important roofing types and their advantages and disadvantages. Now you can easily select the one which suits your industrial business in a better way.