principles of hydraulic press
Hydraulic press have been an important driver for many years. The functions and assumptions of Pascal’s principle that the pressure of the whole closed system is constant still apply today. Many components have been developed since the advent of the hydraulic press around 1795, but the theories and principles are much older. Hydraulic C Type Power Presses
Hydraulic presses are unique things, but very simple. Three basic components are needed for this to work.
First the pump for pumping oil from the reservoir. It can be in the form of an electric, air or manual pump. Furthermore, a non-return valve for diverting or measuring the flow, direction, and volume of this oil.
Eventually, the oil reaches a third component, a cylinder or a working head, which fills the area above the piston cap with oil through port A, which pushes the piston down.
Then, by means of a control valve, the wave can be diverted to the double-acting cylinder port B or diverted back to the single-acting cylinder suspension tank.
Hydraulic presses change the way things are done, and that’s good.
Choose the right or wrong press for your application
Come to press, It has it! There are many of them! Different sizes, shapes and for all types of applications. But choosing the right press is easy when you ask yourself these three important questions. In addition, as a bonus, we explored the history and principles of hydraulic presses.
What questions can you ask?
The largest workpiece size! For mandrel, C-Frame and H-Frame presses, this will dictate the size of the keel (horizontal hole) Daylight (requires vertical space)
Pressure is needed or capacity is needed! For spindle and H-Frame presses, it will determine how much force is required to perform the printing operation. Always add the desired ton. This prevents premature wear when using the press continuously at its maximum capacity, which means less damage to the machine and operator without exceeding the limits for each part.
Speed as frequency! Spindle and H-Frame presses are concerned with how often or how much. How often is the press used or how many parts or operations does each move require? If the amount required is too high, a handshake that requires the operator to pump the piston may not be the best choice. An electric or wind model is more suitable for such an operation if your operator does not have arms like Popeye.
Definition of hydraulic presses
A hydraulic presses is a type of machine that uses a fluid as a working medium to transfer basic energy.
implement various techniques on the principle of PASCAL.
A hydraulic presses usually consists of three parts: the engine (main frame), the power system and
hydraulic control system.
===
Mechanical press vs hydraulic presses: do you know their differences?
A brief introduction to the Hydraulic Presses
A hydraulic presses (also called a hydraulic oil press) is a machine that uses static pressure
in liquid processing of metals, plastics, rubber, wood, powder products.
It is often used in pressing and forming processes, such as pressing, pressing, cold extrusion,
straightening, bending, edging, sheet metal drawing, powder metallurgy, embossing, etc.
Construction of hydraulic presses machines
The largest hydraulic presses
80,000 tons Forging press<
The drop forged hydraulic presses weighing 80,000 tons is 27 meters high in the ground and 15 meters underground.
total length 42 meters and total weight 22,000 tons, making it the strongest and most powerful.
Hydraulic press in the world
The giant hydraulic press for drop forging is a strategic device of the national treasure class, which it symbolizes
strength in heavy industry. There are only a few countries in the world that can do it hydraulically
fittings disassemble.
Look up
forging presses from the Soviet Union in 1976 and in 2005 developed 40,000 tons of forging presses in cooperation with Germany. The first 30,000 tons of die forging press in China were produced almost 40 years after it was quietly produced in 1973. Until the last two years, many large presses were made as explosives.
In 2012 alone, 30,000 tons, 40,000 tons, and 80,000 tons of forging presses were built. That 80,000 tons
The hydraulic press broke the world record held by the former Soviet Union for 51 years. The die forging press is often used for the production of high-strength titanium / aluminum alloy forgings in the aerospace industry,
nuclear energy, petrochemicals, and other fields. In the world, every country with a large forging press has a strong aerospace industry.
Types of hydraulic presses
According to the design, the hydraulic press is mainly divided into:
Four-column hydraulic press
Single column hydraulic press (type C)
Horizontal hydraulic press
Hydraulic press with vertical frame
Universal hydraulic press
Four-column hydraulic press
The four-column hydraulic press is suitable for the maintenance of plastic material, such as the formation of powder products, plastics. Cold forming of products, cold (hot) extrusion of metals, sheet metal drawing, transverse extrusion, bending, penetration, and corrective processes. A four-column hydraulic press can be divided into a four-column two-column hydraulic press, four-column. Three-arm hydraulic press and four-column four-arm hydraulic press.
Hydraulic press with C-frame
Expandable working range, able to extend the stroke of the hydraulic cylinder (optional) with three side compartments with. Maximum extension 260-800 mm. Ability to set a preset working pressure and use a heat sink.
Horizontal hydraulic press
Machine parts can assemble, disassembled, straightened, compressed, extended, bent, cut, etc.
implement a multipurpose machine. The work table of this machine can move up and down, the size extends the opening and closing length machine, which makes it easier to use.
Two-column hydraulic press
This range of products is suitable for pressing, bending, and shaping all types of parts, stamps
embossing, flange, punching, and light stretching of small parts. And it is also suitable for metal powder
design products. Adopting power control with duty cycle. And semi-automatic cycle can protect the pressure delay time and has good sliding block direction, easy operation, easy maintenance, economic stability. According to the needs of users. It is possible to add thermal devices, ejection roller, travel display, counting function. It is manufacture in accordance with the PASCAL law and uses fluid pressure transmission.
Hydraulic Press
The two-column hydraulic press not only has many variants but has various applications. According to the classification according to the type of fluid that transmits the pressure. The hydraulic press can divide into two columns according to the oil. Press and water press. The total water pressure high and often use for forging and pressing. The forging press also divides into two classes: drop forging. Water pressing and free forging, water pressing. A blacksmith’s water press should use a mold, while a free blacksmith’s water press should not. The principle of operation of a hydraulic press
Hydraulic pressing mechanism
The area of the large and small piston is S2 and S1 and the force of the piston is F2 and F1.
los.
According to the PASCAL principle, the pressure of the trapped fluid is the same everywhere, i.e. F2 / S2 = F1 / S1 = p;
F2 = F1 (S2 / SI). The effect of boosting the hydraulic pressure is the same as the mechanical boost. Strength increases, however. No work. The movement distance of the large plunger is thus S1 / S2 times greater than that of the small plunger.
The basic principles are:
The oil pump delivers hydraulic oil to the integrated valve blocks of the cartridge and assigns
into the upper chamber or the lower chamber of the cylinder by a one-way valve and relief
valve. During the action of the high-pressure oil, the oil cylinder begins to move up and down. A hydraulic press is a device that uses fluid to transfer pressure. The PASCAL law applies.
Pressure transfer in a closed vessel
The hydraulic drive system of a four-column hydraulic press consists of a drive, a control mechanism,
executive mechanism, auxiliary mechanism, and working medium. The oil pump usually use as a drive mechanism. One or more bombs select as needed at drive speed.
Working medium
The function of the working medium use in the hydraulic press is not only to transfer pressure. But also to guarantee it. The working parts of the hydraulic press sensitive, reliable, have a long service life. And smaller leaks. The main requirements of the hydraulic press for the working medium are:
Suitable fluidity and low compressibility are available to improve transmission efficiency.
- Anti-bet;
- Good lubrication performance;
- Easy navigation;
Strong performance, long-lasting work without damage. Then uses the emulsify liquid by adding a
small amount of emulsified oil in water to increase lubrication and reduce corrosion. The oil has good lubricating ability, Anti-corrosion. And medium viscosity, which is useful for improving the performance of a hydraulic press. In the second half of the 20th century, a new type of water-based emulsion solution develops. Which describe as “water with oil” instead of “oil with water”. Read about automotive, business, cancer, construction, CBD, communication, beauty, education, fashion, finance, Food and drink, events. Gadgets, farmest, home improvement, insurance, investing, home and family, graphic designing, guide, health and fitness.
Read more: 10 Web Design Tools That Will Help You Create Stunning Websites in 2022